Some more wines with bicycles that I haven't tried yet are are follows.
This is the Spindles blog, Corsham's bicycle maintenance project. The project is now a shop called Spindles Bikes
Email: spindlesbikes(at) gmail.com
See our main site at http://www.spindlesbikes.co.uk
Wednesday, 20 March 2013
A Good Cycling Wine
Some more wines with bicycles that I haven't tried yet are are follows.
Monday, 11 March 2013
Trashed at the Pound
I think this will be a good film, at the Pound in Corsham- http://www.poundarts.org.uk/pound/EventDetails.aspx?artid=2020
Saturday, 2 March 2013
Spring is here
The sun came out today and I was actually warm for a change. At least 2 of the larger jobs were cleared, we sold a bike and all is reasonable well with the world. The rumour is that there will be a Corsham cycling festival this year in the Autumn. Quite what that means it up for grabs so I would be interested in what you thing it should include. Here are my ideas
- Close of some roads in Corsham and get people on bikes.
- lots of stalls
- lots of food
- Themed bike rides - Tandems - tricycles - single speeds - etc.
- Free bike maintenance
- Find some world record to do with the number of bikes in a specific place and break it - read on...
- Longest Time Juggling Three Balls Behind Back While Bicycling
- Longest Tandem Bicycle Ride With A Full-Sized Artificial Skeleton In Back Seat
- Fastest 1/4 Mile Bike Ride With Dog
- Most Decorations On A Bicycle
- Largest Bicycle Pile On Top Of A Person
- Most Back Wheel Pogo Jumps On A BMX Bike In 15 Seconds While Wearing A Lifejacket
read more at http://recordsetter.com/bike-world-records
We probably need to make up our own record
Ideas please
Saturday, 23 February 2013
Our Inaugural Ride
The last Saturday of February was cold and we wavered on whether to go, but 10 people started out at 2:30pm heading for Atworth Farm Shop (known asNeston). We rode down Valley Road and though Leafield, up to Neston, turn right for Chapel Plaister then left at Chapel Plaister, left at the main road and then left into the Farm shop for tea.
It's an inspiring experience and the air was thick with ideas on themed riders - Single speeds - Tandems - Choose a Bike from Spindles - It's not just about nerdy bike things, its the joy of the open road Next ride Saturday March 30th.
The age ranges went from 9 through to 70+ and it turned out to be very sociable. Two Jims, two Bens, a Nick, Edgar, Josh, Mole, Tim and Alistair, here are the starters.
Then we had Edgar and Jim with his tricycle
Josh with his own build - Carbon alloy combination with Campag - Shimano components
It's an inspiring experience and the air was thick with ideas on themed riders - Single speeds - Tandems - Choose a Bike from Spindles - It's not just about nerdy bike things, its the joy of the open road Next ride Saturday March 30th.
The age ranges went from 9 through to 70+ and it turned out to be very sociable. Two Jims, two Bens, a Nick, Edgar, Josh, Mole, Tim and Alistair, here are the starters.
Then we had Edgar and Jim with his tricycle
A Close-Up
The other Jim's 8 speed Charge
Tuesday, 5 February 2013
Spindles Ride
On the 23rd of Feb we will pack up early and go for a ride to a tea shop - weather permitting. Join us for a ride starting at 2.00pm at Corsham Community Centre- hope to finish about 4.30pm - watch this space.
Sunday, 3 February 2013
Ken's classic Italian Racer
More information will follow. Enjoy the images
Thursday, 17 January 2013
bikes stolen in Bristol area
Viper Fujitif Carbon (white), it's a full susser with flexi carbon chain stays, it currently only has a single-ring (red) up front, 36 tooth, and no front changer. Mix of Hope & Goodridge steel braided brake hose. Rear gear cable is Nokon. Ergon carbon grips. Rockshox Reba Team. Time Pedals. Hope Mono Mini disk brakes. Mavic 717 rims on black Hope Pro 2 hubs. Fox RP3 shock.

Giant TCR 2 Composite (black). This pic was taken when new, it hasn't changed at all other than I put on some Red Look Carbon pedals from earlier 90s. Oh, new Vittoria tyres, white/black tread, and new SwissStop brake blocks.

Unbranded Titanium (brushed titanium) - has two sprockets on the rear but it is a singlespeed doesn't have the green tyres any more, they are back to the standard black. Most unusual is the two cogs on the rear but only one is in use at any one time. Hope Headset in red. Rockshox Sidi Team forks. Mavic Crossmax SL wheelset.

Haven't found pictures of silver Raleigh woman's style silver MTB yet
Wednesday, 2 January 2013
Train ‘n Wheels: Caltrain Threatens the Perfect Commute
I came across this article about bikes on trains which our train operators could take note of the picture below
http://www.wired.com/autopia/2008/10/bikes-on-board/
Saturday, 29 December 2012
The American experience
The american experience of the bicycle. 3 eclectic views from america on bikes, transport and good design
A view from Portland
Gerorina Terry designs and builds bikes for Woman and is completely self taught
This guy is surprisingly good and his message gets better and more comprehensive and inspiring as it continues.
A view from Portland
Gerorina Terry designs and builds bikes for Woman and is completely self taught
This guy is surprisingly good and his message gets better and more comprehensive and inspiring as it continues.
Why we shouldn't bike with helmets
This talk add to the helmet debate. I must declare that I only ware a helmet when riding in icy conditions or may be in a city. The arguments presented here are compelling
Why bicycles do not fall down
I came across this TEDx talk about the stability of bicycles and its brilliant.
This could have a profound affect on the development of the bicycle
This could have a profound affect on the development of the bicycle
Saturday, 8 December 2012
Two MBs on a cold day
I decided to build up a single speed Cannondale and a geared Marin. The Marin is a standard 3x7 however we did not have any suitable MB forks so I put a 700c pair in which works rather well.
The Cannondale frame has been around as long as spindles. The frame is fantastic as are all Cannondale frames of this vintage. However if is was to be geared then a considerable amount of money would be needed to justify the frame. Hence the single speed idea and it works.
Thursday, 4 October 2012
Bike Jumble at Spindles
We have loads of second hand bike stuff and we need thin down our stock so come along and rummage. Here are a few images of boxes. We are open every Saturday 9:30 to 2pm ish.
| Handlebars and chainsets |
| More chainsets |
| Hubs and brake levers |
| chains and brakes |
| Forks |
| More Forks |
We have lots new parts as well.
Who made this frame?
This Argos Bike was rescued from being thrown into the skip and being lost. But is it an Argos? I sent the pictures who confirmed that it was not one of theirs but the did refurbish it in the 1980s. The wrap around seat stay is the biggest clue and at least two frame builders provided this design: Holdsworth and Brian Rourke. Here are some detailed pictures of the bike documenting in the state we received it in: Any ideas?
| Beautiful original state |
| Nice detail - wrap around seat stays |
| The forks provide a good clearance |
| Cinelli bars and stem |
| Campagnolo Pedals |
The economics of second hand bikes
Spindles has been around for 3 years now and in that time we have learned to be choosy with bikes that have been donated. Not all bikes can be saved or are worth saving. The cheaper end can just be recycled with only the occasional saddle or brake lever to rescue. It's clear that people want and expect our bikes to work as well as new bike should. This means replacing much of the gearing with new which is expensive.
I cannot believe how the price of bikes has risen over the past few years. A Thorn Club Tour cost £800 7 years ago but now cost £1500. My Mercian now costs £1000 for the fame only. So what should we be charging for a basic bike, what ever that is, if the expectation is that it should work as well as a new bike?
The cheapest bikes we sell are currently £40 but this may be too little if the requirement is for it to work as well as a new bike. Lets analyse a couple of typical donations:
1 racing bike, good frame, components a little worn, chain rusty, rims worn.. it has been a well used bike then neglected. Strip down to the frame, clean the frame and build up with new wheels and salvaged good parts. New wheels cost at least £70, while the salvaged parts value may also be over £70. With the work involved being 7 to 10 hours, including sourcing and trying the components out, we end up with a bike that cost £250+ which may be a marginal proposition for a customer. The frame really has to justify the investment in time and money to make a desirable bike.
1 entry level mountain bike, not used much but has been left out in the rain. There is a lot of rust and the bearings grind. Re-greasing all the bearings, fitting new cables, cleaning and tuning takes about 5 hours. New components would be cables and chain and may be new tyres which all cost £30. The best that a customer would expect to pay would be about £50. The internet option for a new bike is about £70 and Halfords is about £80.
The economics of second hand bikes are marginal so any bike that we work on should be reasonably desirable. It's very hard to turn away donations so we are beginning to favour striping donated basic bikes for specific parts and recycling the rest including the frame.
I cannot believe how the price of bikes has risen over the past few years. A Thorn Club Tour cost £800 7 years ago but now cost £1500. My Mercian now costs £1000 for the fame only. So what should we be charging for a basic bike, what ever that is, if the expectation is that it should work as well as a new bike?
The cheapest bikes we sell are currently £40 but this may be too little if the requirement is for it to work as well as a new bike. Lets analyse a couple of typical donations:
1 racing bike, good frame, components a little worn, chain rusty, rims worn.. it has been a well used bike then neglected. Strip down to the frame, clean the frame and build up with new wheels and salvaged good parts. New wheels cost at least £70, while the salvaged parts value may also be over £70. With the work involved being 7 to 10 hours, including sourcing and trying the components out, we end up with a bike that cost £250+ which may be a marginal proposition for a customer. The frame really has to justify the investment in time and money to make a desirable bike.
1 entry level mountain bike, not used much but has been left out in the rain. There is a lot of rust and the bearings grind. Re-greasing all the bearings, fitting new cables, cleaning and tuning takes about 5 hours. New components would be cables and chain and may be new tyres which all cost £30. The best that a customer would expect to pay would be about £50. The internet option for a new bike is about £70 and Halfords is about £80.
The economics of second hand bikes are marginal so any bike that we work on should be reasonably desirable. It's very hard to turn away donations so we are beginning to favour striping donated basic bikes for specific parts and recycling the rest including the frame.
Saturday, 22 September 2012
New and old bikes
The F. W. Evans came in a couple of weeks ago and has been cleaned up and configured for winter training. The Sunrace STI shifters are surprisingly good, Sunrace are very good at mashing up the best technology and presenting the product at a reasonable price. The rapidfire shifters are very good. Not has much experience of these STIs but there is no reason why they should not prove to be reliable.
We have some really nice Novotech wheel-sets which I am tempted to use on this bike and then use these wheels on the yellow Coppi frame.
The Raleigh Lenton ladies 3 speed is still there with a brooks saddle and classic look.
We have some really nice Novotech wheel-sets which I am tempted to use on this bike and then use these wheels on the yellow Coppi frame.
The Raleigh Lenton ladies 3 speed is still there with a brooks saddle and classic look.
Tuesday, 14 August 2012
Bob Jackson Renovation
The Bob Jackson project was started some time ago when the frame was rescued from a skip and given to us, see original pictures. The late 70's Early 80's Nuovo Olympus with Prugnat Professional lugs and Campagnolo dropouts was deserving of referential treatment while remaining practical. So it was off to Argos Racing Cycles in Bristol who did a fantastic paint job using Monaco Blue with Perl White combination with French bands on the seat tube.
The Chainset is an FSA Gimondi with 48T chainring. This is coupled with a 21T sprocket on the rear hub to provide a low gear and also allow the hub to fit neatly inside the dropouts.
The Bottom bracket is Campagnolo Chorus while the headset is provided by BBB.
The RX600 Brakes are coupled to Modulo brake levers mounted on Lauterwasser handlebars.
The Cinelli stem needed to be shimmed as it was a pre 1994 model.
The Brooks Champion Special B17 is a must and is mounted on an SR fluted pin.
The result is a 25" bike that is just over 10kg. It's a smooth gliding ride which is responsive on the hills
You will find more images at http://www.spindlesandsprockets.co.uk
The result is a 25" bike that is just over 10kg. It's a smooth gliding ride which is responsive on the hills
Monday, 13 August 2012
Castle Combe Cycling Festival
We will be at the Castle Combe Cycling Festival, see http://www.castlecombecyclingfestival.co.uk/ on Sunday the 26th August. We will have a stall which will display our latest bikes and have all our tools with us.
Saturday, 19 May 2012
Inspiring Bike project from US
Can across this film abot a bike project in Arizona. There are some elements we could translate into Corsham Spindles
Saturday, 14 April 2012
New Bikes for Spring
We have have some new bikes in over the last week which can be viewed here. These include a Cannondale M500 MB from the early 1990s. The quality of the frame is always outstanding on Cannondales with the trade mark smooth welds. The paint work is in reasonable condition. Its turned into a very light bike at 11kg. Would be suitable for tall (6foot+) gentleman.
The Giant Expression came in as a donation from the skip. It was minus the cranks which are filled with some Mighty cranks that we had lying about. The Nexus 3 speed and hub brakes make this a low maintenance commuting bike complete with mudguards.
Other new bikes include several Ladies Raleigh bikes.
Friday, 6 April 2012
Ken's folding Bike
Ken showed us his folding bike that he constructed from Columbus tubing some years ago. He made 4 all together with different features (gears, drop bars etc). This is the lightest at 15lbs and is quick 'n' nippy. Fold is useful for train and car journeys. Is it better than a brompton? its certainy lighter although the fold is not as neat.
Subscribe to:
Posts (Atom)









